10 Tips For Quickly Getting Security Lock For Van
10 Tips For Quickly Getting Security Lock For Van
Blog Article
Choosing the Right Security Lock For Your Van
A secure lock can deter thieves and secure your cargo. Some locks are designed to allow DIY installation, while others might require assistance from a professional to ensure that they're properly installed and provide the best security.
Slam locks are perfect for couriers who have multiple deliveries. They lock automatically when the door is shut. Deadlocks are designed to work with the manufacturer's lock and provide an extra layer of security.
Dead Locks
Van dead locks are an additional physical security measure that acts as a strong deterrent to criminals. These locks are made for aftermarket use and protrude through the door of the van. They connect to the frame so they can't be opened without a key. They're especially effective in protecting vans that are parked for a long period of time or have expensive equipment.
They're ideal for tradespeople who prefer the remote locking system of the factory during the day but would like to add an extra layer of security overnight or when they believe their vehicle is in a risky location. They work by throwing the bolt into a receiver fitted into the opposing body section of the van, when activated with the supplied key. They provide an additional security level in addition to the security offered by the manufacturer's locks.
Contrary to Slam locks and Hook Locks (both also available through our online store) which can be locked automatically when the door is closed, these locks require the driver to operate them using the supplied key. A straight bar lock is ideal for rear doors and twin sliding doors, while a hook lock can be used on front or rear doors of medium to small vans.
These are both designed to prevent a thief from attempting to open the lock by force it to open which could give them access to the vehicle's cab or load area. They're specifically designed for each model of van and are located in the best place to provide a second layer of protection against certain attack methods.
The consequences of van theft is important, particularly for professionals like tradesmen and contractors who depend on vehicles to transport vital equipment and tools that they cannot afford to lose. It is costly to replace stolen goods but it can cause loss of income because of unplanned downtime or the inconvenience of finding another transportation. Installing a van lock that is of top quality can safeguard your assets, reduce the risk and deter thieves. It may even help you save on insurance costs.
Hook Locks
Hook locks are an effective way to deter theft in vans. It can be hung on the door of your vehicle. It is not connected to the vehicle's lock and is only opened by the driver with the key. It is a hook-shaped lock that cannot be forced open. It is constructed from high-quality materials. It's also extremely resistant against manipulation and drilling. Sold Secure is the UK's most reliable security product testing body. Many models are designed to meet police specifications and are certified by Sold Secure.
When buying a security lock for your van, you should consider how much protection you need. For instance, if transport expensive tools or sensitive cargo, a more advanced lock like deadlock or slam will be more suitable. On the other hand, if you're only carrying less valuable items or tools, a simple lock like a slam could suffice. Additionally, you should always verify the insurance policies of your provider to ensure that any additional locking mechanisms won't invalidate your insurance coverage.
When selecting a security locking system, it is important to consider its weather resistance. The locks you choose should be able to withstand various weather conditions, as vans are constantly exposed to the elements. They will not diminish their effectiveness or become more easily manipulated by thieves. You should also upgrade the software on electronic locking systems to increase their efficiency and to prevent security weaknesses.
It's important to choose the lock that is simple to install. Some locks are made to be used for DIY installation, while others require professional installation to ensure that they're mounted properly and work in the way they were intended to. Your level of skill, confidence level and the resources you have will determine whether or not you require a professional to install the product.
Catalytic converter locks
Catalytic converters are essential in reducing harmful emissions from your vehicle. This vital part is a target for thieves due to the precious metals that they contain. The black market value of these precious metals has led to an increase in the theft of converters. There are preventive measures available to help combat this problem.
Many people think that a basic security system is sufficient, but they are less effective than a device designed specifically to safeguard your converter. These devices are made to detect vibrations or heat and then emit a loud sound to frighten potential thieves. These devices are more akin to deterrents than protection systems and they tend to cost more than a standard lock.
The patented design of the Cat Clamp converter lock is a tried and true solution to protect catalytic converters from theft. This device is made of a stainless steel wire which runs around the catalytic converter and frame of the car. The cable is twisted up to seven times, and is locked making it very difficult for thieves to remove the converter. The unit can be put in place in just 30 minutes and requires no drilling or welding. It is easy to install on a variety of vehicles and is suitable for use on cars, trucks, SUVs, vans, and other vehicles equipped with the catalytic converter.
Another option for securing your catalytic converter is to install a metal plate that covers the entire unit. Although it's not as easy to install as a metal cage but it does make the converter more difficult to steal. The price of these plates can run between $150 and $270, depending on the brand.
It is essential to keep in mind that no security system is perfect, but preemptive measures can greatly reduce the chances of theft. click here It is important to take the time to secure your vehicle will ensure that your possessions and yourself are safe, and it can help you avoid the cost of replacing a high-cost component. It's also a good idea to have your catalytic converter stamped with your VIN number, since this will help you identify it should it be recovered and sold.
Anti-Peel Kits
This product is designed to guard against the well-known "Peel and Steal" technique. It is mounted on the front edge of the side-loading door on a vehicle. This improves the resistance of your van's doors to 'peel-and steal attacks by as much as 300%. The L4V Anti-Peel Kit, in conjunction with a high-positioned hook lock, decreases the chance that thieves could gain access to your van via the side-loading door.
It is crucial to implement additional van security due to the increasing number of van crime and thefts. One of the most advanced methods is known as "peel and steal," and sees thieves swiping tools and goods from vans within a matter of minutes by applying pressure to the doors with their knees and then twisting, pulling and prying them open to reveal the contents of the load area. This kind of thief is becoming commonplace, and has cost UK tradespeople thousands of pounds worth of tools and inventory.
At Locks 4 Vans we have created a brand new high hook lock + anti peel kit for the Ford Custom to provide a cost-effective solution to this recurring problem. The Anti-Peel Kit, fitted to the barn door of your Ford Custom, reduces the risk of 'peel-and-steal attacks by securing the door's skin and adding a second layer of protection. The hook locks of the highest L4V are installed into the barn door to reinforce the door and secure it if the anti-peel plate was removed.
Online, you can order our anti-peel range and get it delivered to your van in just a few days. Our expert engineers can install the items for you. We have installers located in Greater Manchester and Tameside so can offer our services in areas such as Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.
If you'd like to know more information about improving the security of your van, please get in touch with us now. We offer a range of options to improve the security of your van. These include deadlocks, armour locks, and shielding to stop puncture attacks.